LASER COMPONENTS
Our company produce the next laser components:
General viewShort descriptionManuals
РусEng
ACOUSTOOPTIC SHUTTER POWER SUPPLY
Purpose: control of acoustooptical shutters used for Q-switching.
Features: suppressed "of the first pulse; measurement of output power, VSWR load, frequency and duration of the trigger pulse; remote control RS-232 (RS-485) interface.
Pulsar-04
 
 
• Power change range, W5..25(50)
• Adjusting range of frequency modulation at an internal running, kHz0.2…50
• Adjustment range pulse duration, μs0.4...5000
• Overall dimensions, mm482x225x88
Pulsar4-50CC
 
 
• Power change range, W5..25(50)
• Adjusting range of frequency modulation at an internal running, kHz0.2…50
• Adjustment range pulse duration, μs0.4...5000
• Overall dimensions, mm257x391x108
SCANING SYSTEMS
Purpose: electronically controlled optical-mechanical unit, which provides a deviation of the laser beam at a given angle, in accordance with commands that formed by the control unit together with a personal computer.
Features: control a laser beam on 2m or 3m coordinates, red pilot laser; deflector the company Cambridge Technology Inc (USA).
M100
 
 
• Marking field, mm100x100
• Aperture of the working beam, mm8
• Objective focal length, mm163
M200
 
 
• Marking field, mm100x100; 200x200
• Aperture of the working beam, mm15
• Objective focal length, mm163;320
M200Z
 
 
• Marking field, mm100x100; 200x200
• Aperture of the working beam, mm15
• Objective focal length, mm163;320
• Depth of autofocus ("Z"-coordinate), mm80
SCANNING MODULE CONTROL SYSTEM
Purpose: control systems of scanning laser beam M100, M200, M200Z
Features: a power amplifier of acoustooptic shutter; remote control interface EPP (LPT).
Scanlight 003
 
 
• Output Power Control of acoustooptic shutter, W5..25(50)
• Adjusting range of frequency modulation at an internal running, kHz0.2…50
• Adjustment range pulse duration, μs0.4...5000
• Correction time process to full angle, ms6
COOLING SYSTEM
Purpose: electronically controlled system designed for thermally stabilized cooling of solid state lasers emitters.
Features: display the temperature of water coming from water supply and an internal contour, flow velocity, and emergency situations.
CP 6202M
 
 
• Three-phase power
• Двухконтурный
• Refrigerant the outer contour - the water pipe.
• Refrigerant inner loop - distilled water or deionized water.
• Cooling ability at a temperature difference less than 10°C, measured at the input of the external and internal contours at the exit, not less, KW6
• The required speed water flow in the external circuit, not less, l / min10
LASER POWER SUPPLY
Purpose: designed to pump pulse (LPS6303, LPS2103) and quasi-continuous (LPS607CW) lamp lasers
Features: remote control interface RS-232 (RS-485); galvanic isolation (LPS 6303, LPS2103).
LPS607CW
 
 
• Three-phase supply.
• Powered arc lamps filled with krypton by direct or modulated current
• Output current, A10-40
LPS6303
 
 
• Three-phase supply.
• Powered arc lamps filled with krypton by pulsed current.
• Maximum power output, kW4.5
LPS2103
 
 
• Single phase supply.
• Powered arc lamps filled with krypton by pulsed current.
• Maximum power output, kW1
POWER SUPPLY AND COOLING CABINET
Purpose: designed for power and cooling pulsed and quasicontinuous lamp lasers.
Features: convenient demountable stand on wheels, allowing a compact markup tools that are part of the laser.
LSF22603
 
 
• Three-phase supply.
• Control panel
• Acoustooptic shutter power supply Pulsar04.
• Scanning module control system Scanlight 003.
• Dual cooling system CP 6202M.
EELECTROOPTIC SHUTTERS CONTROL MODULES
Purpose: used for control of electrooptical shutters of pulsed solid-state lasers.
Features: the minimum dimensions, possible improvements of the system to obtain the required quality characteristics.
PCD001M
 
 
• Control of DKDP electrooptical shutters of pulsed solid-state laser.
• Supply voltage, V24
• Positive voltage blocking bias, kV3..5
• The amplitude of the opening of the voltage pulse, kV33..5
PCD001B
 
 
• Control of LiNbO3 electrooptical shutters of pulsed solid-state laser.
• Supply voltage, V24
• Positive voltage blocking bias, kV1,5..2,5
• The amplitude of the opening of the voltage pulse, kV3..5
tel/fax.:+375 (17) 268 09 97
fax:      +375 (17) 262 05 11
e-mail: info@falconls.by
Chernyahovskogo str. 1, 18
Minsk, Belarus
www.falconls.by